In order to have two SSIDs, the router's firmware has to support it. For example, D-Link DIR-825 has a "guest zone", which is essentially a separate SSID that you can use. You can choose whether you want the routing between zones enabled or not. This feature is created in order to give your house guests Internet access without letting them into your home's network, and without giving them your "main" SSID's password.
You CAN NOT have different encryption settings for two different routers that use a common SSID, and connect to both of them with one device - unless you manually intervene. This might change as more and more devices come to contain GPS units - it is conceivable that SSID + location might eventually become a differentiator.
Most of the other users have answered if you can or your can't, and the technical backgrounds into why. So I'll answer with something else equally useful, how to do it. I haven't found a stock firmware that allows this, so I'll point you to DDWRT ( -wrt.com/site/index), if you're able to load DDWRT onto your router, it's super easy to create two "networks" with two different SSID's.
One frequently overlooked aspect of wireless networking is that a network administrators can control interference and channel utilization generated by their own managed wireless system. Dashboard allows admins the ability to enable multiple SSIDs on a single physical AP (Access Point). Each SSID that is enabled on a given AP is called a VAP (Virtual AP). VAPs behave as their own independent AP, operating on the channels the physical AP is set to. Therefore enabling 5 SSIDs on a single AP in Dashboard is nearly identical to deploying 5 physical APs with one SSID each. Normally, multiple SSIDs are used to provide different types of wireless network access to different device types and user classes. The downside of enabling more SSIDs is that it creates more channel utilization due to overhead.
Another suggestion is to configure APs in a Dashboard network to use non-overlapping channels (1, 6, and 11 on 2.4Ghz radios), and in areas where two APs are within range, reduce their transmit power.
The SSID, or Service Set Identifier, of a wireless network is the public name that identifies the network for other devices. You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router. If two routers are both trying to hand out locations on the local area network you'll run into trouble quickly. But with one router set up in a passive mode you can effectively double the coverage area of your Wi-Fi network.
Open the administration page for your primary router. The page is reached by typing the IP address into the address bar of your browser. Typical IP addresses will be something like 192.168.1.1 or 184.108.40.206. If you aren't sure of your router's IP address, check with your manufacturer (see link in Resources).
An important benefit of multiple SSID routers is that you can have password-protected internal and a public guest network. It allows internet access with no internal access. That way, you will end up with a degree of isolation, especially when you set up the router in an environment with many users.
Cambium Networks has Opens a new windowhome/small business router solution Opens a new windows that fits all of your requirements. Our solutions can be managed via cloud or on-prem, allow for single dashboard view for troubleshooting, and offers multiple SSIDs across the network. Our routers can be found toward the bottom of the page that I linked to you. If you have any questions, feel free to tag or PM me!
This article explains how to configure a ProSafe switch and ProSafe access point (AP) for multiple SSID's servicing multiple VLAN's, this is shown in the first section. The second section explains how to configure the ProSafe AP to operate in a dedicated VLAN only.
If you are looking to simply set up a guest network as a secondary option, keep reading. If you want to set up a proper second network using the same router that is completely unaffiliated with your current wireless network, contact your Internet service provider (ISP.)
Adding an extra WiFi name without adding an extra wifi router possible by creating a virtual SSID in the same Router. Use Multiple SSID in Single Access Point up to 4 different wifi names using a single wifi access point with simple steps. see here to
Popular WiFi brands provide multiple SSID options to create a virtual network for network separations. Adding multiple WiFi names in a single router will broadcast multiple WiFi names and can be used to divide the department or as guest networks. Even though the Wi-Fi router is single but virtual Wifi name is multiple and can also be protected from accessing each other data. In this post, you will get the option to enable multiple wifi names in a single access point without sharing data with each other. If you are facing a low wifi signal issue in your home or office then you may also use the repeater mode configuration to increase signals
In legacy, the Wifi router does not support the guest network but you can use VAP (Virtual Access Point) to create a guest wifi network. Although, the latest WiFi router has a guest network option, if you are using an old wifi router which does not support visitor SSID then use the Multiple SSID options. Most of the router support 1 main and 3 Virtual SSID options where you can use up to 4 WiFi network names from a single WiFi Router. Follow the steps to enable multiple SSIDs with a single access point in TP-Link, D-Link, Tenda, Netgear, iBall, and other popular brands.
TP-Link BGN series WiFi router supports multiple SSID options to create separate Wi-Fi names for guests or for different departments. Although, the latest TP-Link router having the option to add a guest network with many control options like the time limit, the speed limit for managing guest wifi networks.
While using multiple routers the same SSID needs to be required to enable a seamless network with fast roaming connectivity. But when using a single router and wanting to run multiple Wi-Fi names then need to create a virtual network. In virtual networks Access points with different virtual SSID can be used to create multiple wireless names to divide for guests and any other networks.
OpenWrt most widely used firmware in wifi routers so you can also follow these steps to create multi SSID in DLink, create multiple SSID in Mikrotik, and create multiple said in cisco ap, and any other brands which support virtual AP.
Adding a virtual WiFi name protects your main WIFi network accessing and sharing with guest users. You can also use two routers with the same SSID to create the same virtual network name using different wifi routers.
The first instalment in our series on getting more out of your basic home router gets you familiar with the relevant concepts and terms, and begins to walk you through the process of setting up multiple SSIDs.
If you thought that having multiple service set identifier (SSID) and virtual local area network (VLAN) support could only be possible in enterprise-level access points (APs), we have good news. With help from DD-WRT, a popular open-source firmware replacement, you can pack countless extra and enterprise-level features into your inexpensive home Wi-Fi router.
What are multiple (or virtual) SSIDs? In general, multiple (or virtual) SSIDs allow you to create multiple network names or SSIDs on one AP or radio with the ability to customize their individual security and broadcast settings. Additionally, you can assign the virtual SSIDs to different VLANs to provide segregation between the virtual wireless networks. Here are some examples of what you could do with virtual SSIDs:
Part II: The next installment in our series shows exactly how to configure multiple SSIDs with the DD-WRT firmware, and discusses overcoming the connectivity issues brought up by using this multiple SSID (not rhe BSSID) method.
In this example we will demonstrate how to configure the DWS-3160 with two separated by VLAN, one for the internal network of the company SSIDs and other guest usersNote: To provide internet to different VLAN, you need the router / firewall can be configured VLAN.In this example we will use the following VLAN:VLAN 1: Internal company networkVLAN 100: Guest usersPhysical connections:DWL-6600 connected to the Port 1Router with access to Internet, VLAN and DHCP server for each VLAN connected to Port 24
Step 3 - In each port having an access point connected, the port must be configured as Tagged. This is to allow the access point to understand traffic from VLAN 1 (in this example, the access point is on Port 1) In the port where you connected the router must be configured as Tagged for the traffic of VLAN 1 to pass from router to the DWS-3160Note: If you have a switch that needs to send traffic on this VLAN, the port will also have to be Tagged. If a port connects a computer and that computer belongs to VLAN, that port will have to be Untagged. If a port does not belong to the VLAN, you have to configure as Not MemberOnce completed, then click Apply"
DD-WRT is arguably the most popular firmware replacement or upgrade for select wireless routers. In addition to many other things, it gives you the ability to create virtual wireless networks (multiple SSIDs) and configure virtual LANs (VLANs). These features let you offer public or separated access, and are usually found only in more expensive enterprise-level gear. You get them and much more at the cost of just a cheap home router. 2b1af7f3a8